Geology and Mining in Geita
Geita lies on the Sukumaland greenstone belt, with gold hosted principally in banded iron formation and in structurally controlled zones cutting the BIF and adjacent intrusives. The Geita goldfield hosts several orebodies including Nyankanga, Geita Hill, Lone Cone and Star and Comet. The strength of the BIF-hosted signature is why magnetic surveying works so well in this district and why ore here tends to be competent and abrasive, which in turn drives comminution equipment selection.
Who Operates Here
- Geita Gold Mine, operated by AngloGold Ashanti, one of the largest gold mines in Africa
- A large licensed small-scale sector working the same belt on adjacent ground
- Contractors, drilling companies and service providers based around the mine
Getting Equipment to Geita
- Roughly 1,250 km by road from Dar es Salaam, commonly routed through Mwanza
- About 120 km from Mwanza, so most consignments stage through Mwanza rather than travelling direct
- Road access from Mwanza involves crossing the Mwanza Gulf, which should be factored into scheduling for abnormal loads
- Grid connected in the main centres, with standby generation normal on outlying sites
- Water is generally available, which widens the plant options compared with drier districts
What Geita Operations Buy
Geita ore is competent and abrasive, so comminution specification matters more here than in districts working softer oxide material. Undersized crushers and thin mill liners fail quickly on this ore. The district also has enough grade and tonnage in places to justify leach circuits, so Geita sees more CIL enquiries than anywhere else we supply.
Jaw Crusher
View specifications →
Ball Mill for Gold Ore
View specifications →
CIL & CIP Gold Plants
View specifications →
Centrifugal Gold Concentrator
View specifications →
Modular Gold Processing Plant
View specifications →
Slurry Pump
View specifications →This is what the district buys most, not the full range. Browse the full catalogue for winches, processing plant, pumps, safety equipment, software and power.
Frequently Asked Questions
Why does equipment wear out faster in Geita?
The banded iron formation hosted ore in this belt is competent and abrasive. Jaw plates, mill liners and slurry pump wet ends all wear faster here than on softer oxide ore at the same tonnage. Specify manganese content on jaw plates and high-chrome or composite mill liners, and budget wear parts per tonne rather than per month.
Is a CIL plant justified for a small mine near Geita?
Sometimes, and more often here than elsewhere in Tanzania, because grades in parts of the district support it. The test is whether the gold left in your gravity tailings pays for the leach circuit plus its compliance and labour overhead. Assay the gravity tailings before deciding, because on many operations gravity alone remains the better answer.
How is equipment delivered to Geita?
Almost always through Dar es Salaam then by road via Mwanza, roughly 1,250 km in total. Abnormal loads need the Mwanza Gulf crossing planned in advance, along with route permits, so allow substantially more lead time for anything oversized such as a mill shell or an assembled tank.
Does geophysics work well in the Geita area?
Magnetic surveying is particularly effective across this belt because the banded iron formation that hosts much of the gold is strongly magnetic, so the stratigraphy and the structures cutting it map clearly. Magnetics does not detect gold itself, but in this district it is an unusually good guide to where to drill.
Supply to Geita
Need equipment delivered to Geita?
Tell us the duty, the site conditions and your power supply. We quote landed in Geita, with freight, duty and inland transport included, so the figure you approve is the figure you pay.