Corded, Cordless or Petrol: Choosing a Makita Platform
Every main product below runs on one power source. Corded tools give full power for all-day work where mains or generator power is available. 18V LXT cordless tools share one battery system across a very wide range; twin-battery 36V tools use two 18V batteries. 40V max XGT cordless tools deliver close to corded power for heavier work; 80V tools use two 40V batteries. 12V max CXT tools are compact for light jobs. If your site already uses one battery system, staying with it saves buying more batteries and chargers.
In each table, the model is one tool and its options are kit codes: codes ending in Z are usually the tool body only, while longer codes include batteries, a charger and a case. The "What's different" column explains models that share the same headline specification. These tools are available through Bart Mining in partnership with Makita Tanzania.
Makita Bench Grinder
Corded bench grinders of 150 mm and 205 mm for sharpening chisels, drill steels and tools in the workshop.
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Die Grinder LXT
An 18V cordless die grinder with an 8 mm collet for precise grinding away from power.
| Model | Options (kit codes) | Key specification |
|---|---|---|
| DGD800 | DGD800Z | 18V LXT • 26 000 min⁻¹ • 8 mm |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Die Grinder
Corded die grinders with 6 mm and 8 mm collets for deburring, porting and fine grinding in tight spaces.
| Model | Options (kit codes) | Key specification | What's different |
|---|---|---|---|
| 906 | 906H | 290 W • 6 mm • 25 000 min⁻¹ | |
| GD0600 | GD0600 | 400 W • 25 000 min⁻¹ • 6 mm | Paddle (dead-man) switch |
| GD0602 | GD0602 | 400 W • 25 000 min⁻¹ • 6 mm | Slide switch with lock-on |
| GD0603 | GD0603 | 240 W • 28 000 min⁻¹ • 6 mm | |
| GD0800 | GD0800C | 750 W • 7 000 – 28 000 min⁻¹ • 8 mm | |
| GD0801 | GD0801C | 750 W • 7 000 – 29 000 min⁻¹ • 6 mm | |
| GD0810 | GD0810C | 750 W • 1 800 – 7 000 min⁻¹ • 6 mm | |
| GD0811 | GD0811C | 750 W • 1 800 – 7 000 min⁻¹ • 8 mm |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Straight Grinder
750 W corded straight grinders for 125 mm and 150 mm wheels, for grinding inside pipes and on large castings.
| Model | Options (kit codes) | Key specification |
|---|---|---|
| GS5000 | GS5000 | 750 W • 125 mm • 5 600 min⁻¹ |
| GS6000 | GS6000 | 750 W • 150 mm • 5 600 min⁻¹ |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Die, Straight & Bench Grinders Specifications
The figures below describe typical industry specifications for this class of equipment rather than a single fixed model. Use them to scope a requirement, then confirm exact figures against the supplied unit before purchase.
| Specification | Typical value |
|---|---|
| Brand | Makita |
| Main products | Bench Grinder, Die Grinder LXT, Die Grinder, Straight Grinder |
| Models listed | 13 models (13 kit codes) |
| Power options | Corded electric, 18V LXT cordless |
| Sizes | 6 mm and 8 mm collets; 125–150 mm straight grinders; 150–205 mm bench grinders |
| Availability | Through Bart Mining in partnership with Makita Tanzania; confirm the model and kit when you enquire |
Makita Die, Straight & Bench Grinders: Uses and Applications
- Deburring and finishing machined and welded parts
- Grinding inside pipes and castings
- Sharpening chisels, drill steels and tools
- Fine grinding in tight spaces
Maintenance Schedule
Most premature failures in this equipment class trace back to a missed routine check rather than a design fault. The intervals below are a practical starting schedule; adjust them to your duty cycle and the manufacturer manual.
| Interval | Task |
|---|---|
| Every use | Check grinding points and wheels for damage; keep tool rests close to bench wheels. |
| Weekly | Clean vents and check cables or batteries. |
| Every few months | Have brushes on corded models checked. |
| As needed | Dress bench wheels and replace worn points. |
Frequently Asked Questions
Die grinder or straight grinder?
Die grinders are small and fast for points and burrs; straight grinders take larger wheels for heavier grinding inside pipes and on castings.
Paddle or slide switch on a die grinder?
A paddle (dead-man) switch stops the tool when released; a slide switch with lock-on suits long jobs. Follow your site rules.
Can a bench grinder sharpen drill steels?
Yes, with the right wheel and care not to overheat the carbide. Follow the drill-steel maker’s regrinding guidance.
Supply and Delivery Across Tanzania
Bart Mining supplies makita die, straight & bench grinders and related equipment to mining operations throughout Tanzania, with primary coverage of the Lake Victoria Goldfields (Mwanza, Kahama, Geita, Shinyanga and Bukombe), alongside the Lupa Goldfields around Chunya and Mbeya, and delivery nationwide from Dar es Salaam.