Corded, Cordless or Petrol: Choosing a Makita Platform
Every main product below runs on one power source. Corded tools give full power for all-day work where mains or generator power is available. 18V LXT cordless tools share one battery system across a very wide range; twin-battery 36V tools use two 18V batteries. 40V max XGT cordless tools deliver close to corded power for heavier work; 80V tools use two 40V batteries. 12V max CXT tools are compact for light jobs. If your site already uses one battery system, staying with it saves buying more batteries and chargers.
In each table, the model is one tool and its options are kit codes: codes ending in Z are usually the tool body only, while longer codes include batteries, a charger and a case. The "What's different" column explains models that share the same headline specification. These tools are available through Bart Mining in partnership with Makita Tanzania.
Makita Angle Grinder LXT
18V cordless angle grinders from 115 mm to twin-battery 230 mm, brushed and brushless, for cutting and grinding away from power.
| Model | Options (kit codes) | Key specification | What's different |
|---|---|---|---|
| DGA452 | DGA452RTJ, DGA452Z | 18V LXT • 115 mm • 11 000 min⁻¹ | Brushed motor |
| DGA454 | DGA454RFJ, DGA454RTJ, DGA454Z | 18V LXT • 115 mm • 11 000 min⁻¹ | Brushless motor |
| DGA455 | DGA455RFJ, DGA455RTJ | 18V LXT • 115 mm • 8 500 min⁻¹ | Brushless, paddle switch (difference from DGA458 not stated) |
| DGA456 | DGA456Z | 18V LXT • 115 mm • 8 500 min⁻¹ | Brushed motor |
| DGA458 | DGA458Z | 18V LXT • 115 mm • 8 500 min⁻¹ | Brushless, paddle switch (difference from DGA455 not stated) |
| DGA469 | DGA469Z | 18V LXT • 115 mm • 3,000 – 8,500 min⁻¹ | |
| DGA519 | DGA519Z | 18V LXT • 125 mm • 3 000 – 8 | |
| DGA700 | DGA700ZK | 36V (18Vx2) LXT • 180 mm • 7 800 min⁻¹ | Standard |
| DGA701 | DGA701ZKU | 36V (18Vx2) LXT • 180 mm • 7 800 min⁻¹ | Adds AWS wireless dust-extractor start |
| DGA900 | DGA900ZK | 36V (18Vx2) LXT • 6 000 min⁻¹ • 230 mm | |
| DGA901 | DGA901ZKU1 | 36V (18Vx2) LXT • 230 mm • 6 000 min⁻¹ |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Angle Grinder XGT
40V cordless angle grinders of 115 to 230 mm with corded-class power, with options for paddle or slide switch, brake, X-LOCK and wireless dust-extractor start.
| Model | Options (kit codes) | Key specification | What's different |
|---|---|---|---|
| GA004G | GA004GM202, GA004GZ02 | 40V MAX XGT • 115 mm • 8 500 min⁻¹ | Standard: slide switch, AFT |
| GA005G | GA005GM203, GA005GZ02 | 40V MAX XGT • 125 mm • 8 500 min⁻¹ | Standard: slide switch, AFT |
| GA012G | GA012GM202, GA012GZ02 | 40V MAX XGT • 115 mm • 8 500 min⁻¹ | Adds electronic brake (listing contradicts itself on switch type) |
| GA013G | GA013GM203, GA013GZ02 | 40V MAX XGT • 125 mm • 8 500 min⁻¹ | Paddle switch + electronic brake |
| GA022G | GA022GM101, GA022GM202, GA022GZ02 | 40V MAX XGT • 115 mm • 3 000 – 8 | |
| GA023G | GA023GM203, GA023GZ02 | 40V MAX XGT • 125 mm • 3 000 – 8 | |
| GA028G | GA028GM101, GA028GM202, GA028GZ02 | 40V MAX XGT • 115 mm • 8 500 min⁻¹ | Brake + AWS + variable speed |
| GA029G | GA029GM203, GA029GZ02 | 40V MAX XGT • 125 mm • 8 500 min⁻¹ | Paddle switch + brake + AWS + variable speed |
| GA037G | GA037GM204, GA037GZ06 | 40V MAX XGT • 180 mm • 7 800 min⁻¹ | |
| GA038G | GA038GM204, GA038GZ06 | 40V MAX XGT • 230 mm • 6 600 min⁻¹ | |
| GA040G | GA040GM201, GA040GZ | 40V MAX XGT • 115 mm / 40V MAX XGT • 115 mm • 8 500 min⁻¹ • X-lock | Slide switch + AWS + X-LOCK |
| GA041G | GA041GM201, GA041GZ | 40V MAX XGT • 125 mm • 8 500 min⁻¹ • X-lock | Slide switch + AWS + X-LOCK |
| GA046G | GA046GM201, GA046GZ | 40V MAX XGT • 115 mm • 8 500 min⁻¹ • X-lock | Paddle switch + brake + anti-restart + X-LOCK |
| GA047G | GA047GM201, GA047GZ | 40V MAX XGT • 125 mm • 8 500 min⁻¹ • X-lock | Paddle switch + brake + anti-restart + X-LOCK |
| GA049G | GA049GT101, GA049GZ | 40V MAX XGT • 115 mm • 11 000 min⁻¹ | |
| GA050G | GA050GT101, GA050GZ | 40V MAX XGT • 125 mm • 11 000 min⁻¹ |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Angle Grinder
Corded angle grinders from 100 mm to 230 mm, the workshop standard for cutting steel, grinding welds and preparing surfaces.
| Model | Options (kit codes) | Key specification | What's different |
|---|---|---|---|
| 9015 | 9015B | 1 050 W • 125 mm • 10 000 min⁻¹ | 125 mm, large trigger switch |
| 9553 | 9553HNG | 710 W • 100 mm • 11 000 min⁻¹ | |
| 9554 | 9554HNG | 710 W • 115 mm • 10 000 min⁻¹ | |
| 9555 | 9555HNG | 710 W • 125 mm • 10 000 min⁻¹ | |
| 9556 | 9556HNG, 9556HPG | 840 W • 100 mm • 11 000 min⁻¹ | |
| 9557 | 9557HNG, 9557HPG | 840 W • 115 mm • 11 000 min⁻¹ | |
| 9558 | 9558HNG, 9558HPG | 840 W • 125 mm • 11 000 min⁻¹ | |
| 9561 | 9561CR | 1 200 W • 115 mm • 12 000 min⁻¹ | |
| 9562 | 9562CR | 1 200 W • 125 mm • 12 000 min⁻¹ | |
| GA4040 | GA4040CZ, GA4040Z | 1 400 W • 100 mm • 11 000 min⁻¹ / 1 100 W • 100 mm • 11 000 min⁻¹ | |
| GA4050 | GA4050 | 1 300 W • 100 mm • 11 000 min⁻¹ | |
| GA4530 | GA4530 | 750 W • 115 mm • 11 000 min⁻¹ | |
| GA4540 | GA4540CZ, GA4540Z | 1 400 W • 115 mm • 11 000 min⁻¹ / 1 100 W • 115 mm • 11 000 min⁻¹ | |
| GA4550 | GA4550, GA4550R | 1 300 W • 115 mm • 11 000 min⁻¹ | |
| GA4591 | GA4591 | 115 mm • 1 900 W • 11 500 min⁻¹ | Slide switch (difference from GA4592 not stated) |
| GA4592 | GA4592 | 115 mm • 1 900 W • 11 500 min⁻¹ | Slide switch (difference from GA4591 not stated) |
| GA4594 | GA4594 | 115 mm • 1 900 W • 11 500 min⁻¹ | Paddle switch |
| GA4595 | GA4595 | 1 900 W • 115 mm • 11 500 min⁻¹ | |
| GA5010 | GA5010 | 1 050 W • 125 mm • 12 000 min⁻¹ | Standard trigger |
| GA5011 | GA5011 | 1 050 W • 125 mm • 12 000 min⁻¹ | Large trigger, slightly longer body |
| GA5040 | GA5040CZ, GA5040Z | 1 400 W • 125 mm • 11 000 min⁻¹ / 1 100 W • 125 mm • 11 000 min⁻¹ | |
| GA5050 | GA5050, GA5050R | 1 300 W • 125 mm • 11 000 min⁻¹ | |
| GA5080 | GA5080R | 1,400 W • 125 mm • 12,000 min⁻¹ | |
| GA5091 | GA5091 | 1 900 W • 125 mm • 2 800 – 11 | Slide switch, SJS II, AFT, brake, soft start |
| GA5092 | GA5092 | 1 900 W • 125 mm • 11 500 min⁻¹ | Slide switch, adjustable speed |
| GA5094 | GA5094 | 1 900 W • 125 mm • 2 800 – 11 | Paddle (safety) switch |
| GA5095 | GA5095 | 1 900 W • 125 mm • 11 500 min⁻¹ | Paddle (safety) switch |
| GA6010 | GA6010 | 1 050 W • 150 mm • 10 000 min⁻¹ | 150 mm, paddle switch (corrected: makita.co.tz lists 125 mm) |
| GA7040 | GA7040S | 2 600 W • 180 mm • 8 500 min⁻¹ | |
| GA7050 | GA7050 | 2 000 W • 180 mm • 8 500 min⁻¹ | |
| GA7062 | GA7062 | 2 200 W • 180 mm • 8 500 min⁻¹ | Newer generation; anti-restart, D-handle |
| GA7063 | GA7063 | 2 200 W • 180 mm • 8 500 min⁻¹ | Newer generation |
| GA7070 | GA7070 | 180 mm • 6 600 min⁻¹ • 2800 W | |
| GA7080 | GA7080 | 180 mm • 6600 min⁻¹ • 2700 W | |
| GA9030 | GA9030 | 2 400 W • 230 mm • 6 600 min⁻¹ | |
| GA9040 | GA9040S | 2 600 W • 230 mm • 6 600 min⁻¹ 230 | |
| GA9062 | GA9062 | 2 200 W • 230 mm • 6 600 min⁻¹ | Newer generation, 2 200 W |
| GA9070 | GA9070 | 230 mm • 6 600 min⁻¹ • 2800 W | |
| GA9080 | GA9080 | 230 mm • 6600 min⁻¹ • 2700 W |
Specifications are as published by Makita Tanzania; confirm the model, kit and availability when you request a quotation.
Makita Angle Grinders Specifications
The figures below describe typical industry specifications for this class of equipment rather than a single fixed model. Use them to scope a requirement, then confirm exact figures against the supplied unit before purchase.
| Specification | Typical value |
|---|---|
| Brand | Makita |
| Main products | Angle Grinder LXT, Angle Grinder XGT, Angle Grinder |
| Models listed | 66 models (96 kit codes) |
| Power options | 18V LXT cordless, 40V max XGT cordless, Corded electric |
| Sizes | 100, 115, 125, 150, 180 and 230 mm |
| Availability | Through Bart Mining in partnership with Makita Tanzania; confirm the model and kit when you enquire |
Makita Angle Grinders: Uses and Applications
- Cutting steel sections, bolts and liners during maintenance
- Grinding welds and preparing joints
- Removing rust and paint before repairs
- Cutting concrete and stone with diamond discs
Maintenance Schedule
Most premature failures in this equipment class trace back to a missed routine check rather than a design fault. The intervals below are a practical starting schedule; adjust them to your duty cycle and the manufacturer manual.
| Interval | Task |
|---|---|
| Every use | Check the disc for cracks and the guard position; never remove the guard. |
| Weekly | Clean the air vents; check the cable or battery, side handle and switch. |
| Every few months | Have brushes on corded models checked and replaced. |
| As needed | Use discs rated for the grinder’s speed and size. |
Frequently Asked Questions
Which size grinder do I need?
115 or 125 mm for most cutting and grinding in a workshop. 180 or 230 mm for cutting thick sections and heavy grinding. Many workshops keep both.
Paddle or slide switch?
A paddle switch stops the grinder as soon as it is released, which many sites require for safety. A slide switch can lock on for long grinding. Check your site rules.
Are cordless grinders powerful enough?
The 40V XGT models are close to corded 1 000 W class grinders and suit most maintenance work. For all-day heavy cutting, corded large grinders are still the standard.
Supply and Delivery Across Tanzania
Bart Mining supplies makita angle grinders and related equipment to mining operations throughout Tanzania, with primary coverage of the Lake Victoria Goldfields (Mwanza, Kahama, Geita, Shinyanga and Bukombe), alongside the Lupa Goldfields around Chunya and Mbeya, and delivery nationwide from Dar es Salaam.